One Stop Driver Training logoFind your lesson
All driving guides

Licences & work

Forklift, dangerous goods and WTR training in Levin and Kāpiti

One Stop trains workers from Levin, Horowhenua, Ōtaki and Kāpiti in forklift operation, dangerous goods and wheels, tracks and rollers (WTR). Choose by the task: a forklift certificate for workplace use, F to drive a forklift on a road, D to carry dangerous goods, and W, T or R to drive special-type machines on a road. Forklift training can run at your worksite for groups of four or more, and WTR worksite training is available on request.

Illustration: a trainer goes over a clipboard checklist with three workers outside a depot.
Your next step

Forklift, dangerous goods and WTR training

Choose workplace training Training details

Workplace licences are easy to mix up. A forklift certificate, an F endorsement and a D endorsement each cover a different task, and passing one course doesn’t cover the others.

One Stop’s owner and trainer, Steve Wilkinson, is a Competenz-registered forklift trainer and a registered Connexis assessor for wheels, tracks and rollers. Courses run for people and employers in Levin, Horowhenua, Ōtaki and across Kāpiti. The venue and dates are confirmed when you book, and prices include GST.

Which certificate or endorsement fits the job?

Match the training to the task, not the job title. NZTA requires F to drive a forklift on a road, D to carry dangerous goods for hire or reward, and W, T or R to drive special-type machines on a road.

Some workers need two. Someone who drives a forklift across a yard with no gate, for example, may need F as well as workplace training.

  • Forklift work at your workplace, off the road: forklift operator training and a Certificate of Competency
  • Forklift driving on a road: operator training plus the F endorsement
  • Carrying dangerous goods such as fuel or chemicals by road: the dangerous goods course, then a D endorsement if your work needs one
  • Driving loaders, graders, diggers, dozers or rollers on a road: the W, T or R endorsement

Workplace courses at a glance

The table compares each One Stop workplace course. Prices are per person and include GST.

CourseWho it’s forWhat you needWhat you getPrice
Forklift operator training, about 5 hoursNew operators using a forklift at workTell the team which equipment you’ll useCertificate of Competency$260.00
Forklift operator training and F endorsement, about 5.5 hoursOperators who drive a forklift on a roadA full NZ Class 1 licenceCertificate of Competency, plus a certificate to apply for F$330.00
Forklift operator refresher, about 5 hoursExperienced operatorsA current operator certificate, with evidenceCertificate of Competency$230.00
F endorsement onlyPeople who need the road endorsement onlyThe right licence class for the forklift’s loaded weightA certificate to apply for F (unit standard 18496)$120.00
Wheels, tracks and rollers (W, T, R)Operators who drive special-type machines on a roadA current full NZ Class 1 licence (Class 2 for tracked or roller machines over 18,000 kg)A certificate for each endorsement (unit standards 16701, 16703, 16702)All three $360.00; W $207.00, T $207.00, R $207.00
Dangerous goods initial assessment, one dayDrivers getting their first D endorsementAt least a Class 1 learner licence, and you must read, write and understand spoken EnglishNZTA course certificate (unit standard 16718)$350.00
Dangerous goods refresher, one dayDrivers renewing a D endorsementA current dangerous goods certificateNZTA course certificate (unit standard 16718)$300.00

Planning your training? Choose workplace training and check the options for your next step.

When do you need an F endorsement?

You need F to drive a forklift on a road, and NZTA defines a road very broadly. It includes streets and highways, and any place the public has access to, such as bridges, beaches, riverbeds, wharves and road shoulders. Even a factory yard with no gate may count.

Your licence class sets the size limit. A Class 1 licence with F covers forklifts up to 18,000 kg loaded. Over 18,000 kg loaded, you need Class 2 with F. The F endorsement is for driver licensing only, and your employer may also require health and safety training.

Who needs a dangerous goods D endorsement?

You need D to carry dangerous goods for hire or reward, at any amount, and that includes licensed transport operators. If you carry them as tools of trade for farm or commercial work, you need D once you’re over the Schedule 1 limits of the Land Transport Rule: Dangerous Goods 2005, with some exceptions. Domestic or recreational use doesn’t need one.

Not sure where your loads sit? Call NZTA on 0800 822 422 before you book.

One Stop’s one-day course covers the Dangerous Goods Rule, documentation, keeping incompatible goods apart, placarding and emergencies. Interpreters can’t be used. Courses are listed for Palmerston North, Levin, Kāpiti and Wellington.

Which machines need W, T or R?

R is for rollers, T for machines on self-laying tracks and W for special-type vehicles on wheels, such as those used in mining or roadworks. You need the endorsement to drive these machines on a road. W doesn’t cover forklifts, passenger vehicles, tractors, fire engines, trade vehicles or vehicle recovery vehicles.

Your licence class depends on the machine. Tracked or roller machines of 18,000 kg or less need a full Class 1 with T or R, and heavier ones need Class 2. Wheeled machines follow the weight and speed rules in the table.

One Stop’s WTR course is a theory and practical assessment. You can do one, two or all three endorsements.

Wheeled special-type vehicleLicence class with W
6,000 kg or lessClass 1
Over 6,000 kg to 18,000 kg, 40 km/h or lessClass 1
Over 6,000 kg to 18,000 kg, faster than 40 km/hClass 2
Over 18,000 kg, 40 km/h or lessClass 2
Over 18,000 kg, faster than 40 km/hClass 4

Can One Stop train a group at your Levin or Kāpiti worksite?

Yes. Forklift training can run at your worksite for groups of four or more, and WTR training at your worksite is available on request. Send the details below through the course page or the contact page.

The team confirms the arrangements before you plan rosters. For dangerous goods, send the number of drivers and whether each needs the initial course or the refresher.

  • Your worksite location, for example Levin, Ōtaki or elsewhere in Horowhenua or Kāpiti
  • The number of operators, and which are new and which need a refresher
  • The equipment they use
  • Your preferred dates

Adding the endorsement to your licence

The course certificate alone doesn’t let you drive. Take it to a licensing agent such as AA or VTNZ, and the endorsement goes on your licence. Until it does, you can’t drive a forklift or special-type machine on a road, or carry dangerous goods where D is required.

  • F: a DL19 form, your NZ full licence or two other forms of ID, the course certificate, an eyesight check and $62.10
  • W, T or R: a DL19 form, ID, an eyesight check, the course certificate and $62.10 for each endorsement
  • D: a DL19 form, ID, a medical certificate if required, an eyesight check, a course certificate no more than 60 days old and $20.70

Renewing D, F, R, T and W endorsements

A D endorsement lasts 5 years. To renew it, you complete another course and apply again. Book One Stop’s refresher before your D expires, as it needs a current certificate. NZTA sends a reminder about six weeks before expiry.

F, R, T and W endorsements expire on the same date as your driver licence. They renew when you renew your licence.

Your forklift Certificate of Competency is separate from F. WorkSafe’s code recommends a refresher every three years.

Common questions

Is a forklift certificate the same as an F endorsement?

No. The Certificate of Competency covers forklift use at work. The F endorsement goes on your driver licence and lets you drive a forklift on a road, which NZTA defines broadly.

Do I need a D endorsement to carry fuel for my own farm?

Not always. For agricultural or commercial tools of trade, you need D only above the Schedule 1 limits of the Dangerous Goods Rule. Carrying for hire or reward always needs D.

Does the W endorsement cover tractors?

No. W covers special-type vehicles on wheels, such as roadworks machines, but not tractors, forklifts or trade vehicles. Forklifts need F, which is part of One Stop’s forklift course.

How much does the endorsement cost at AA or VTNZ?

The NZTA fee is $62.10 for each F, R, T or W endorsement and $20.70 for a D endorsement. You pay it at the licensing agent, separately from the course price.

Sources and further reading

Check the linked official guidance when planning an application or test. A training booking is separate from applying for a licence.