Licences & work
Forklift licence NZ: how to get one, cost and renewal
In New Zealand, a forklift licence usually means one of two things: a workplace operator certificate, or the F endorsement on your driver licence. The certificate covers safe forklift use at work, and you need F as well if any of your driving is on a road, which NZTA defines very broadly. To add F, you pass an approved course, then apply at AA or VTNZ and pay the $62.10 NZTA fee.

Ask three employers for a forklift licence and you might get three different answers. One means training for the warehouse floor. Another means the F on your driver licence. A third wants both. They’re separate things, and they renew on different timetables.
This guide covers how to get each one, what the course options cost, the NZTA fee, which licence class you need and when to renew. For a deeper comparison of the two documents, read our forklift certificate vs F endorsement guide.
What is a forklift licence in NZ?
There’s no single document called a forklift licence. The phrase covers two things, and your job may need one or both.
The operator certificate shows you’ve been trained to use a forklift safely at work. At One Stop it’s a Certificate of Competency, issued when you pass operator training. The F endorsement is different. It goes on your driver licence, and NZTA requires it if you drive a forklift on a road.
| Question | Operator certificate | F endorsement |
|---|---|---|
| What it’s for | Using a forklift safely at work | Driving a forklift on a road |
| Where it’s recorded | A Certificate of Competency from your trainer | On your driver licence |
| How you get it | Pass operator training | Pass an approved course, then apply at AA or VTNZ |
| Fee to NZTA | Not an NZTA document | $62.10 |
| When to renew | WorkSafe’s code recommends a refresher every three years | It expires with your driver licence |
Source: NZTA: Applying for a forklift F endorsement · WorkSafe: Forklift training · NZTA: Driver licence fees
Do you need the F endorsement?
You need F if you drive a forklift on a road. The catch is how NZTA defines a road. It covers streets and highways, and also any place the public has access to.
That can include bridges, beaches, riverbeds, wharves and road shoulders. NZTA says a factory yard with no gate may count too. So a forklift that never leaves the yard could still need F if the public can walk or drive in.
F doesn’t cover the workplace side on its own. NZTA says the F course is for driver licensing only, and employers may also require health and safety training. One Stop’s combined option covers both in about 5.5 hours. Plan for F if any of these describe your work:
- You cross a public street to move between buildings.
- You load or unload on a wharf.
- You work in a yard with no gate, where the public can walk or drive in.
- You drive along a road shoulder to reach another part of a site.
Source: NZTA: Applying for a forklift F endorsement
Planning your training? Choose forklift training and check the options for your next step.
How much does a forklift licence cost?
The cost depends on the option you choose. One Stop’s course prices below include GST. Any option with F also has a $62.10 NZTA fee, which you pay at the licensing agent, not to One Stop.
So for operator training and F together, budget $330.00 for the course, plus $62.10 at AA or VTNZ. If you only need road use added to your licence, ask about the F endorsement only option.
| Option | Good for | Course price incl. GST |
|---|---|---|
| Operator training for the workplace | Using a forklift at work, about 5 hours | $260.00 |
| Operator training and F endorsement | Work and road use, about 5.5 hours, needs a full Class 1 licence | $330.00 |
| Operator refresher | Holders of a current certificate, about 5 hours | $230.00 |
| F endorsement only | Adding road use to your driver licence | $120.00 |
Source: NZTA: Driver licence fees
How do you get the F endorsement on your licence?
You pass an approved F course, then apply at a licensing agent such as AA or VTNZ. Once F is on your driver licence, you can drive a forklift on a road.
One Stop’s F course covers unit standard 18496: the road rules and knowledge you need to drive a forklift on a road. When you pass, you get a certificate to take to the agent. Here’s the order of steps:
- Book operator training and F, or the F endorsement only.
- Pass the course and keep your certificate.
- At AA or VTNZ, fill in a DL19 form.
- Show your NZ full driver licence, or two other forms of ID.
- Hand over your course certificate and pass the eyesight check.
- Pay the $62.10 NZTA fee.
Source: NZTA: Applying for a forklift F endorsement · NZTA: Driver licence fees
Class 1 or Class 2: which licence goes with F?
A Class 1 car licence with F covers forklifts up to 18,000 kg loaded. Forklifts over 18,000 kg loaded need Class 2 with F. NZTA’s rule uses the loaded weight, not the empty weight.
Check the machine before you book. If your employer runs a heavy forklift, ask for its loaded weight so you know which side of 18,000 kg it falls on.
One Stop’s operator and F option needs a full NZ Class 1 licence. If you need Class 2 for a heavier forklift, that’s a separate truck licence course with its own learner licence step.
| Forklift weight, loaded | Licence you need |
|---|---|
| Up to 18,000 kg | Class 1 with F |
| Over 18,000 kg | Class 2 with F |
What happens on the forklift course?
Operator training takes about 5 hours, or about 5.5 hours with the F endorsement added. Your trainer is Steve Wilkinson, a Competenz-registered forklift trainer.
Operator training teaches you to drive a forklift safely, following WorkSafe’s code of practice. The F part adds the road rules and knowledge for driving on a road. The refresher is for experienced operators and covers practical skills and safety.
Training runs at One Stop’s venue or at your worksite, for people around Palmerston North, Levin, Ōtaki and Kāpiti. The venue and dates are confirmed when you book. You finish with a Certificate of Competency, plus a certificate for the agent if you chose an F option.
When do you renew a forklift licence?
The two parts run on different clocks. Your F endorsement expires on the same date as your driver licence. For the operator certificate, WorkSafe’s code recommends a refresher every three years.
That code is WorkSafe’s Approved Code of Practice for training forklift operators and instructors. WorkSafe notes it hasn’t been updated for the Health and Safety at Work Act 2015, but says it may still contain relevant practice.
To book the refresher, you need a current operator certificate, with evidence. Has yours lapsed, or can’t you find it? Talk to the team about operator training instead.
Source: WorkSafe: Forklift training · NZTA: Applying for a forklift F endorsement
Training a team of operators onsite
Employers with four or more operators can have the training run at their worksite. Send the worksite, the number of operators, the equipment they use and your preferred dates.
Say which staff need F as well, and who already holds a current certificate and only needs the refresher. That helps the team plan the session.
Common questions
How long does it take to get a forklift licence?
The course takes about 5 hours for operator training, or about 5.5 hours with the F endorsement. For F, you then apply at AA or VTNZ, and you can drive on a road once F is on your licence.
How much is the NZTA fee for an F endorsement?
$62.10 including GST for a new F endorsement. It’s non-refundable, paid at the licensing agent, and separate from the course price.
Source: NZTA: Driver licence fees
Can I drive a heavy forklift on my car licence?
Yes, up to 18,000 kg loaded, as long as you hold Class 1 with F. Forklifts over 18,000 kg loaded need Class 2 with F.
Does the F endorsement expire?
Yes. It expires on the same date as your driver licence.
Can I do the refresher if my certificate has expired?
The refresher needs a current operator certificate, with evidence. If you can’t show one, talk to the team about operator training instead.
Sources and further reading
Check the linked official guidance when planning an application or test. A training booking is separate from applying for a licence.
Find your lesson


